fts home page

   fts contactsfts newsfts eventsfts publicationsindustry linksfts seminars
   
Products
Freeze-Dryers
• SMART Freeze-Dryer™ Technology
• Manifold Systems
• R&D Process Development Systems
Thermal Control Systems
• Recirculating Chillers
• Immersion Coolers
• Low Temperature Baths
• Vacuum Cold Trap
Temperature Forcing Systems
Controlled-Rate Freezers  
NMR/EPR Sample Coolers
SP Industries Home
  

Front End Vacuum Cold Trap
Titan Trap® | Vapor Trap
.
Vapor Trap
Maximum efficiency for vacuum trapping vapors to -90°C, without LN2 or dry ice		 Specification Sheet

Vapor Trap - FTS Systems • Starts up in less than ten minutes
• Cools to a low temperature of -50°C or -90°C
• Accommodates vacuum pump flow rates up to 250 liters per minute
• Traps one, three, or five liters of condensate in 24 hours
Applications
  Gel drying
  Evaporators
  Dryers
  Protection of oil-sealed vacuum pumps

 

Features Benefits
• Mechanically refrigerated • Eliminates the cost and potential hazards associated with dry ice and LN2
• One touch operation • Easy to use
• Small footprint • Saves space

 

Model Specifications1
  VT255 VT455 VT490 VT890
Maximum Low Temperature °C -50 -50 -90 -90
Chamber Volume (liters) 2 4 4 8
Trapping Rate (liters/24 hours) 1 3 3 5
Compressor 1/4 hp 1/3 hp Two @ 1/4 hp Two @ 1/4 hp
Controls On/Off On/Off On/Off On/Off
Indication ¾C - 1 1 1
Dimensions W x D x H inches 10.5 x 20.5 x 11 15.5 x 24 x 13 19 x 24 x 13 19 x 24 x 13
cm 26.7 x 52.1 x 27.9 39.4 x 61 x 33 48.3 x 61 x 33 48.3 x 61 x 33
Weight lbs/kg 55/25 55/25 85/39 85/39
Electrical2 120V/60 Hz/4A 120V/60 Hz/4A 120V/60 Hz/7A 120V/60 Hz/7A
1.Vapor traps do not include tops.
2. 220V/50 Hz also available. Decreases heat removal by 17%.

 

Vapor Trap Top Plates and Liners
Plates   
  SSVT2 Stainless steel vacuum top plate, 2L, 3/4" OD inlet, 5/8" OD outlet
  SSVT4 Stainless steel vacuum top plate, 4L, 3/4" OD inlet, 5/8" OD outlet
  SSVT8 Stainless steel vacuum top plate, 8L, 3/4" OD inlet, 5/8" OD outlet
  TTGT2 Glass vacuum top plate (safety-coated), 2L, 1/2" OD inlet/outlet
  TTGT4 Glass vacuum top plate (safety-coated), 4L, 1/2" OD inlet/outlet
  TTGT8 Glass vacuum top plate (safety-coated), 8L, 1/2" OD inlet/outlet
Liners   
  CRC2 Glass liner with copper mesh heat transfer jacket, titanium down tube, 2L, 1/2" OD inlet/outlet
  CRC4 Glass liner with copper mesh heat transfer jacket, titanium down tube, 4L, 1/2" OD inlet/outlet